finishing
-
Finishing Advice
I am almost done with building a toy chest for my neighbor's little boy. I made if from oak plywood and red oak for the corners and trim. So, what do you suggest we use to stain and finish it? :dontknow: What type of stain will work easily for them? :eusa_thin Is poly in multiple coats the... -
S
Finishing carvings
A couple of points here to the new carvers in the crowd. Carvings do not finish like normal flat pieces. Keep in mind that every surface that is rounded or cut exposes end grain. A carving that is left unsanded will finish differently from one that has been sanded. Cuts from a v tool or... -
Paint filter - spray gun holder
Hole in top is 4 3/4" dia.- Bill Clemmons
- Media item
- filter finishing fixture gun spray
- Comments: 0
- Album: Paint filter - spray gun holder
-
Paint filter - spray gun holder
Shelf pivots on short pieces of 1/8" dowels driven in from sides.- Bill Clemmons
- Media item
- filter finishing fixture gun spray
- Comments: 0
- Album: Paint filter - spray gun holder
-
Paint filter - spray gun holder
Low wall in front is 2" high.- Bill Clemmons
- Media item
- filter finishing fixture gun spray
- Comments: 0
- Album: Paint filter - spray gun holder
-
Paint filter - spray gun holder
Sized to fit my gravity feed gun.- Bill Clemmons
- Media item
- filter finishing fixture gun spray
- Comments: 0
- Album: Paint filter - spray gun holder
-
Paint filter - spray gun holder
Top of flip up shelf is 5" from bottom of base.- Bill Clemmons
- Media item
- filter finishing fixture gun spray
- Comments: 0
- Album: Paint filter - spray gun holder
-
Paint filter - spray gun holder
7 1/2w x 7d x 19h. Made from 1/2" plywood.- Bill Clemmons
- Media item
- filter finishing fixture gun spray
- Comments: 0
- Album: Paint filter - spray gun holder
-
Any Finishing Tips for Cool Weather Finishing?
I have a project ready for finishing, using Waterlox Original Sealer & Finisher. I am going to remove any dust by wiping the wood down with paint thinner. Since I have shop cats, who do not wander out of the shop, I will be doing using the thinner and finish outdoors. What is the lowest... -
Finishing cedar outdoor bench
I am making a rustic eastern red cedar half log style bench for my neighbor. She doesn't want the natural look, so I am trying Marine spar varnish. The bench is a half log for the seat and a half log for the back. The cut surfaces have been sanded to 180. Can I only finish the cut surfaces to... -
A
Finishing overview
I just completed a box for my wife and have stained it in pecan stain. I was hoping that some of you could give me some finishing tips. What do the different things like shellac, BLO, and other popularly used items do? Thanks for the information Alex- AlexSwansboro
- Thread
- finishing overview
- Replies: 1
- Forum: Finishing
-
L
Charles Neil Spray Finishing Class
If anyone is looking for an excellent class on spray finishing water based products I heartily recommend they consider Charles Neil's finishing class in New Market Virginia. I just completed the class and learned tons. We covered everything from wood prep and blotch control to coloring with... -
Finishing Room
Light and fan switches outside finish room. No need for explosion proof this way.- Bill Clemmons
- Media item
- finishing room ventilation
- Comments: 0
- Album: Finishing Room
-
Finishing Room
Fan inside filter box, outside finish room.- Bill Clemmons
- Media item
- finishing room ventilation
- Comments: 0
- Album: Finishing Room
-
Finishing Room
Barrel bolt on outside of wide door. Bottom.- Bill Clemmons
- Media item
- finishing room ventilation
- Comments: 0
- Album: Finishing Room
-
Finishing Room
Barrel bolt on outside of wide door. Top.- Bill Clemmons
- Media item
- finishing room ventilation
- Comments: 0
- Album: Finishing Room
-
Finishing Room
Jig for holding filter and spray gun, or container.- Bill Clemmons
- Media item
- finishing room ventilation
- Comments: 0
- Album: Finishing Room
-
Finishing Room
Jig for holding filter and spray gun, or container.- Bill Clemmons
- Media item
- finishing room ventilation
- Comments: 0
- Album: Finishing Room
-
Finishing Room
Peg board area.- Bill Clemmons
- Media item
- finishing room ventilation
- Comments: 0
- Album: Finishing Room
-
Finishing Room
Stir sticks from scraps in a coffee can mounted to wall.- Bill Clemmons
- Media item
- finishing room ventilation
- Comments: 0
- Album: Finishing Room
Premier Sponsor
Our Sponsors
LATEST FOR SALE LISTINGS
-
-
SOLD -- $75: Gast moa v113 Vacuum Pump Veneer, 60" bag and board- Started by peterdnight
- Replies: 1
-
GONE: Gladiator 5 cleats, 10 hangers, Paper Towel and Shelf
- Started by peterdnight
- Replies: 3
-
SOLD -- $100 Makita mac700 portable air + grex pin nailer + 2 others + 50' hose
- Started by peterdnight
- Replies: 1
-