finished

  1. B

    Crib is finished

    Well by butt isn't going to be toast after all! I have the crib finished and set up. It is all Cherry with 1/4" plywood on the top of the mattress support. Stained with red mahogany and wipe on poly. This started as rough Cherry that I worked down into what you see. The slats are mortised...
  2. B

    Chest of drawers finished...

    Well I finally finished the chest of drawers for my daughter that is due in less than two weeks. I made quite a few mistakes and learned a lot about wood working and myself in the process. It isn't on par with a lot of the work I have seen you guys do but I am quite proud of it, mistakes and...
  3. farmerbw

    Finished another table

    While at Lazy Daze last month we were approached by the SPCA to donate an item for their annual Fur Ball gala/auction. We agreed to donate something and after discussing it for a bit decided to create something specifically for them instead of just giving them an item already on hand. So...
  4. skysharks

    Finished the Chest of Drawers

    I promised a finished picture of the Chest of Drawers so here it is. Thanks for looking.
  5. dino drosas

    Finished top Unit for Chest of Drawers

    After I made the bow front chest of drawers, I decided to make a smaller drawer unit to sit on top of it. A set of junk drawers , if you will. I got the inspiration looking through a Thomas Moser catalog and I have to admit that I am quite happy with it. I had just gotten my Festool Domino when...
  6. T

    Cabinet commission **FINISHED* (UPDATED)

    This kitchen cabinet is a commission piece. It is an odd sized piece to fit in an area to maximize space. It is going right next to a refrigerator and against a wall. The basic dimensions are 66"h x 27"d x 14"w. It will be sprayed a satin white. The materials are MDF, poplar and tempered...
    • toolferone
    • Thread
    • cabinet commission finished pics updated wip
    • Replies: 26
    • Forum: General Woodworking
  7. S

    Inlay table finished

    Finally, I just finished my first inlay experiment. Also first time making a set of legs other than just straight or tapered. I think the legs were more time consuming than the inlay. Used Walnut gel stain to tone down some sapwood (nothing personal Roger) and used wipe on poly for some gloss...
  8. Larry Rose

    Finished Table

    This is the finished cypress deck table hard at work on the shop porch. It will be moved to its permanent position on the deck at Kitty Hawk this week end. I had to try it out to see if it works properly. :occasion1
  9. farmerbw

    A couple of finished projects

    Here's a few of the many projects I had going simultaneously over the last couple of weeks which generated a few other posts. Unfortunately I had to load the table and bench twice on Saturday since neither sold. :no: Granted it's probably a good thing the table didn't sell since minutes before...
  10. T

    Cubbie cabinet commision finished. (pics)

    The customer needed an odd size cabinet to go next to a vanity. This is his design built by me. This cabinet measures 83"t x 11"w x 18"d and is made of 3/4" maple plywood with maple iron on edge banding. It is assembled with pocket hole joinery. I plugged the pocket holes in the front only. I...
    • toolferone
    • Thread
    • cabinet commision cubbie finished pics
    • Replies: 5
    • Forum: General Woodworking
  11. WoodWrangler

    Queen Bed Finished!

    As you may recall, for TOO LONG I've had this queen bed project hanging around my shop. It started as a friend who wanted to build it himself, with my tools of course ... but that never happened, so I built it just to get it out of my shop. I made him sand it though ... figured he could do the...
  12. SkintKnuckle

    Finally finished the sofa table

    I've been working on this for several months, along with several other projects, it's finally finished. The top is lacewood, zebra wood trimmed in some really light hard maple and plain mahogany. The legs and aprons are figured mahogany trimmed in some more maple and some walnut scraps. I...
  13. brenthenze

    new barn/workshop: the easy half is finished!

    All, Thought some of you might like to see pictures of the new barn/workshop as it goes up. So far I'm about halfway done, but it's the easier half: the slab (which I hired someone else to do), the walls, and the second story floor (aka first story ceiling joists). Three trusses are up, but...
  14. erasmussen

    Finished

    I got the lattice work sliding doors done and installed:eusa_danc I am not really happy with them, If the flat work forces get string again and i have to make any more there is a couple of things i will do different, but a good learning experance:confused_ Anyway they slide nice and smooth...
  15. S

    Inlay tabletop finished

    Finally! My first inlay project other than just a small straight strip of contrasting wood. I learned I don't have the patience for this type work and its to hot for tedious work. Inlay was cut from Walnut, cut on scroll saw as one piece and scribed onto the Maple with exacto knife and then...
  16. John Reeves

    Finished the Kitchen

    The floors were the last thing. "] Knot Head at work De-construction Working Hard Still the LOML
  17. PurpleThumb

    Maple Bench finished

    I'm going to try this again. I finished a David Marks style meditation bench several weeks ago and thought I'd try posting a photo. the bench was sculpted from some Spalted Hard Maple which was a bear to shape. It was one of those projects that once started sat around the shop in the way until I...
  18. PurpleThumb

    Finished the Rocker-Finally

    It's only been slightly over 13 months from start to finish but I think it was worth the effort. Of course I did finish an occasional chair and have knee replacement in the interim. I know!:eusa_booh For those lucky enough to sign up for John Riichards chair class, you'll love it...
  19. MrAudio815

    Cedar Chest Finished w/ Pic's

    Hey Everyone, I am finished with the Cedar Chest after two months of woodworking and two weeks of uploading the photos. I have enjoyed making this piece of work. It was challenging and fun, My lovly wife helped me sand, well she pretty much sanded 99% of it. She is amazing! Let me know what...
  20. Ncdawgs1882

    Finished a Business Logo for a client!

    So here's a finished Business Logo The Dark wood is Black Walnut (Thanks Alan!) & the Light wood is Cotton wood! Also here's a picture of the original logo!

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top