drum

  1. N

    Tone Box Plans

    Hey, Everybody. Still learning, but I thought I'd share a project. This is the second tongue drum/tone box I've built. Sides are 4/4 birdseye and top is Padauk, all joined with 1/2"x 1/2" rabbets and yellow glue. Half-inch birch is screwed onto the bottom to give access to tune tongues. I...
  2. jonnyfontaine

    Which wide drum sander is best

    Hi, I am looking into buying a new wide drum sander. The two that i'm most focused on at the moment are the JET 16-32 and the Performax 19-38. Other sanders I'm looking at are; Performax 19/38 1.75hp 110v 0-10fpm accuracy 0.01 lots of good reviews $1399.00 JET 10/32 1.5hp 110v 0-10fpm separate...
  3. Stuart Kent

    help improve dual drum sander

    Hi all, I have a 26" Steel City Dual drum sander; I have struggled to keep paper on it since the day I bought it. It really is a good machine when it works and I'd like to find a way to make it work reliably. I've tried tape. I've tried adjusting the clips (they are simply junk). The machine is...
  4. Rick M

    30 gal. barrel or drum for dust collection ... where?

    The plan: integrate a Thien baffle with my 1HP DC. Fan will be relocated atop the baffle which will set on the barrel. All in one solution. I'll have to carry the barrel to dump it, maybe 50-60 feet, so a smaller plastic barrel around 30 gal. would be better. I'd rather empty it more often than...
  5. Custom Walnut wood Djembe - Hand Drum

    Custom Walnut wood Djembe - Hand Drum

    Hand drum (djembe) custom built from walnut wood slats. Maple inset with seal engraved, and metallic banding with tack work around the bottom. Custom wave carving. Lathe and V-Chisel for shaping
  6. Custom Walnut wood Djembe - Hand Drum

    Custom Walnut wood Djembe - Hand Drum

    Hand drum (djembe) custom built from walnut wood slats. Maple inset with seal engraved, and metallic banding with tack work around the bottom. Custom wave carving. Lathe and V-Chisel for shaping
  7. Custom Walnut wood Djembe - Hand Drum

    Custom Walnut wood Djembe - Hand Drum

    Hand drum (djembe) custom built from walnut wood slats. Maple inset with seal engraved, and metallic banding with tack work around the bottom. Custom wave carving. Lathe and V-Chisel for shaping
  8. Custom Walnut wood Djembe - Hand Drum

    Custom Walnut wood Djembe - Hand Drum

    Hand drum (djembe) custom built from walnut wood slats. Maple inset with seal engraved, and metallic banding with tack work around the bottom. Custom wave carving. Lathe and V-Chisel for shaping
  9. IMAG0293

    IMAG0293

    Drum Sander WIP
  10. Walnut Djembe

    Walnut Djembe

    Djembe Drum - walnut and yellow heart
  11. jaustin

    Looking for a Drum sander

    I currently have the 10/22 performax drum sander. I am thinking about upgrading to a 16/32 size drum sander. Anyone have or possibly know of someone selling a drum sander?
  12. TN Woodie

    Grizzly Drum Sander 1/2 price

    Sorry guys, but once again, this is in knoxville, but it seems like a good deal. A Grizzly 24" dual drum sander for $750. http://knoxville.craigslist.org/tls/2698294452.html
  13. pviser

    drum sander advice needed

    Hi Guys, I'm getting tired of leaving swirl marks from my 21 X 3 belt sander. Therefore, I'm now in the market for a drum sander. The Jet oscillating 22" drum sander seems like a good choice. While I'd love to have a monster 5 HP Powermatic wide belt sander, I have to be practical. All...
  14. KenOfCary

    Shopmade Vortex Drum

    Since it is a pain to empty the bag on the Dust Collector, I decided to make a simple Vortex Drum using the system from Rockler and a Fiber Drum I got from Industrial Supplies on the web. It was easy to do and seems to work very well. This is the Rockler input/output duct system...
  15. cyclopentadiene

    Need help installing sandpaper on Delta 18-36 drum sander

    I have a Delta 18-36 model 31-255 drum sander that I purchased used. It was working fine but needed a new sanding belt applied to the drum. i purchased a 4 pack and have destroyed 3 of the sheets (at $7 each) with no successful sanding job completed. The instructions in the manual make it...
  16. R

    dual drum sander set up

    I have recently purchased the Woodtek 26" dual drum sander and I am pretty satisfied with the results I am getting. I do have a question about set up, however. The leading drum (the drum the wood goes under first) is factory set and can't be adjusted. The trailing drum (i.e. the second drum)...
  17. S

    PERFORMAX 16-32 DRUM SANDER TRADE FOR 10-20 (Raleigh)

    not mine: Reposting from earlier CL Ad for 3 reasons: -Still available, ad reposted, earlier ver may have been deleted -Newer Ver has pic of actual tool being traded -Earlier someone had posted an interest in, but unable to do in Mar versus April Good luck...
  18. W

    Drum sanders

    Hello everyone, I'm new to the site. I am wanting to purchase a drum sander. I am looking at the Woodmaster 26" model for about $2400, General single drum 24" for about $1400 and the General double drum 24" for about $2000. From what I have read I want to stay away from the opened ended models...
  19. BrianInChatham

    Feed direction relative to drum rotation in drum sander

    I picked up a used Grizzly 24" dual drum sander recently and finally got around to setting it up last night. Once I got the drums dialed in it produces a decent finish, but the stock is coming out with a thick layer of sawdust compressed to the surface. I've noticed when I brush it off that in...
  20. S

    PERFORMAX 16-32 DRUM SANDER TRADE FOR 10-20 (Raleigh)

    not mine http://raleigh.craigslist.org/tls/2277668731.html PERFORMAX 16-32 DRUM SANDER TRADE FOR 10-20 (Raleigh) Date: 2011-03-21, 12:24PM EDT Reply to: sale-r2jwv-2277668731@craigslist.org [Errors when replying to ads?] I have a Performax 16-32 Drum sander on a stand and it is a...

Our Sponsors

LATEST FOR SALE LISTINGS

Top