drop

  1. construction progress

    construction progress

    Leg billets for the drop leaf table have been jointed, squared and stickered to rest before final sizing. The leg pattern sits on top of one of the billets. They were dried within 1/4 inch of the billet size needed so I don\'t expect much change.
    • Charlie Buchanan
    • Media item
    • corner drop leaf table
    • Comments: 0
    • Album: Dropleaf card table
  2. construction progress

    construction progress

    Couple of sequential walnut boards for dropleaf table project 4/4 x13x 10\'6"
    • Charlie Buchanan
    • Media item
    • corner drop leaf table
    • Comments: 0
    • Album: Dropleaf card table
  3. T

    drop leaf table to expanding table

    been searching the web about a hour or so but thought I would make a thread here and see if anyone has any ideas I have a old walnut I think dining room table... it is a drop leaf on both sides that measures about 26" each each and then the regular table part is 27" deep so open you get a...
  4. b4man

    Need tips on replacing a drop in range

    ...with a slid in. Know I have to cut out the base, change the hard wire to a 4 wire range receptacle. What I need is some good ideas about how to remove the drop in range and what am I going to find as far a the base construction was built? I am trying to avoid surprises. TIA, Barbara
  5. J

    Drop in bearings

    Today, I replaced the rear bearing on a 3 phase motor which I'm planning to use for rotary converter. I used a bearing puller to remove the old one. Then I took new bearing, and put it on top of a 75 watt light bulb (turned on of course.) After about five minutes, using a pair of leather gloves...
  6. Dymondwood Stopper

    Dymondwood Stopper

    Dymond wood wine stopper. Made by Jack Mincey
    • flyrod444
    • Media item
    • drop
    • Comments: 0
    • Category: Spindle Work - 2010 Calendar Contest
  7. chris99z71

    Drop cloths and funnels

    Not even Harbor Freight can screw up drop cloths and funnels. I hope.:eusa_thin
  8. NZAPP1

    Apex wood drop off some of the wood

    The loot, Loads of pen blanks :eusa_danc I also received 5- 11 x 11 x 6 curly sycamore bowl blanks :icon_thum :occasion1 I am shore the other members that received wood will be posting
  9. NZAPP1

    Apex wood drop off

    Jeff stopped buy this morning with a load of wood NC Woodworkers shooting the breeze Peter O, Dave O, Jeff, Bob N, and China Woody And yellofins stopped by and dropped off a box of FF biscuits sorry no photo so it did not happen :rolf:
  10. D L Ames

    Moderation Drop Down Menu

    Monty, The moderation drop down menu located at the bottom of each forum page is defaulted to "Delete Thread". Would it be possible to change the default to "Close Thread"? I suspect with the current requirement to close threads > 30 days old that the "Close Thread" option will be the most...
  11. Oak Jewelry box - Open

    Oak Jewelry box - Open

    • Henry W
    • Media item
    • - box drop jewelry tear
    • Comments: 0
    • Category: Member Galleries
  12. Oak Jewelry box - Closed

    Oak Jewelry box - Closed

    • Henry W
    • Media item
    • - box drop jewelry tear
    • Comments: 0
    • Category: Member Galleries
  13. Tom Dunn

    Wide drop leaf table

    I am in the process of making rough sketches/plans for a drop-leaf table, material not selected yet. The center portion will be about 12" wide, the leaves 24-28". Weight is not a problem, saving space is foremost. Sturdy construction is important. Would it be better to make the leafs from 5/4...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top