dimensions

  1. W

    Need advice re mortise and tenon dimensions

    Am building an end table, my first, and would like some input regarding mortise and tenon dimensions. The legs are 1 1/2 square and the aprons are 4 in x 3/4 in. My question is how to size the M&T. Thinking tenon width to be 1/4 inch and tenon length to be 1 inch. Width to be 2 inches...
  2. D

    Anyone use Driving Dimensions add-on with Sketchup?

    I've completed a Sketchup design for multiple built-in pantry cabinets/shelves and now find I have to go back in and change my component dimensions from nominal to the actual thickness of plywood and melamine. I was looking the easiest way to do this and found an add-on "Driving Dimensions"...
  3. oldhippie1951

    Table Saw router extension dimensions

    Could some of you let me know what to watch out for when locating my slots please? Extension dimensions are going to be 27" x 16". I'm thinking of eliminating the T-Track next to the Miter Track because I bought a Miter Slot Hardware Kit. They work on the cast iron table so they should work in...
  4. Bas

    Cabinet dilemma

    I got all my materials, tools and jigs to build some cabinets for the shop. I've run into a bit of a problem with the conduit running down the wall. For example: (this isn't exactly the spot for which I'm making upper cabinets, but it will suffice for the explanation. Conduit runs down the...
  5. Table Dimensions

    Table Dimensions

    Full table: 46-1/2''D x 52-1/2''W. Permanent table: 12-1/2''D x 52-1/2''W Folding table: 31-1/2''D x 52-1/2''W
  6. rick7938

    Workbench Dimensions

    I am wanting to construct a new workbench for for small workshop. I am really limited in space since my shop is only 12 X24 ft. I think that I can only have a bench about 5-feet long, but I am wondering what is the accepted standard for bench width? Most of the benches that I see advertised have...
  7. W

    Dimensions of Seat for a Mission Dinning Chair

    I just finished the construction of 4 mission style dinning chairs. Now I need to make the seats. Could the experts here give me some guidances on the dimensions for the seats. I want to use plywood for the seats. The seats then will be covered with foam and leather. Thanks. Qui
  8. S

    Dimensions?

    My dad surprised me with a call tonight!! He had a busy day:eusa_clap He has the following down and ready for processing (all are straight, no crotches, with at least the first 10' clear of limbs on all specimens). 1 Walnut—18" at butt, 26' long, 12" at tip 1 Red Oak—24" at butt, 36' long...
  9. smessick

    Pool table rack dimensions

    I'm building a cue rack for my daughter and son-in-law and am thinking of making a triangular table rack. I've spent some time searching and have sent email inquiries to several billiards suppliers and still haven't found dimensions for a rack. Can anybody help? Thanks. Stan Messick

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top