design

  1. buildintechie

    Help design my shop!

    Help me design my shop! Hello all- I've introduced myself in the introductions forum, but I'm a relatively novice woodworker. I recently bought a house, and have finally been able to stop using a garage for a wood shop, and have a dedicated building. However, my new building is smaller than...
  2. thrt15nc

    WIP - Morris design chair

    Here's a couple of pics of a chair I've been working on for ages.:embaresse Cushions are being made, next is more sanding, then staining, finish coat, etc. Then this one gets to live in the living room!! <Thank you dear!> Thanks for looking, Tom
  3. Al Millman

    HD Design Center Going out of Business

    I was at the HD Design Center today, they are going out of business here in Charlotte and saw that they have the DW716 12" DUAL BEVEL COMPOUND MITERSAW marked down to $279 and change. That's 30% off $399.00 reg price, they also have the Makita 10.8 V lithium-ion pair (TD090DW Drill & Driver) in...
  4. WoodWrangler

    Anyone have a copy of Woodturning Design Fall 2005?

    Anyone have a copy of this Woodturning Design magazine I could borrow/buy? http://www.woodturningdesign.com/issues/fall05.shtml
  5. dpsnyder

    Design ideas, anyone?

    I know no one here is very opinionated :wink_smil but thought I'd ask anyway... I am trying to finish up a tiletop kitchen trestle table. LOML put 3 table pictures in front of me and said build me that! (like thats never happened to anyone else :no:) So it has evolved slowly. Anyway I have...
  6. Phil S

    Work bench top design question

    I am hoping to build a new work bench and I have some recovered maple locker room benches that I think could be laminated into a nice top. The benches are 9" wide by 1 1/4" thick. I was thinking of using three wide by two or three thick (resulting in a 27" by 72" top that is 2 1/2" or 3 3/4"...
  7. ptt49er

    Chest of Drawers/TV stand Design Critique

    I have a friend wanting a chest of drawers/TV stand for her bedroom. She dictated the outside dimensions and height and an overall idea of what she wanted. I've played around with the drawer depth because she wanted 14" deep drawers, I figured that would be a little deep for clothes. So I've...
  8. davejones

    BDR - Bookcase Design Review

    Howdy All, I am in the planning stages of my first real project and need some help so I don't learn all the lessons the hard way! :BangHead: I am going to build a built-in bookcase to fit in a nook in my home office. Here is a rough sketch of the design I have so far. And just in case you...
  9. TKKids

    Best Way to Design Work?

    I know there are various free programs out there, but what do some of you guys use? I have looked at SketchUp and I guess I am too simple minded to get it to work right. I really want something that is simple and I can enter in dimensions. Thanks Tim
  10. Bryan S

    Attaching Top and a little design help

    Got the top glued up and sanded back flat (well relitavly flat) but it needs a little something. Heres the top Heres the top setting on the entertainment center It seams like the top needs a profile routed into the edges but what would work. I routed a 1/4 in roundover beaded...
  11. Sharp Blade

    Danish Modern Desk Design help.

    I need some advice. I have been looking for a design to copy for a desk I want to make. I found this desk on eBay http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=230264298433 and wanted to see what it would take to make a plan for this. I have NO experience in drawing...
  12. Bigdog72

    Dust Collection System Design

    I know that DC system design is a matter of personal preference but I still need some advice. I have seen dc trunk lines run overhead, under the floor (can't do it) and somewhere in between. My shop is 16x24 and I plan on running the main line at approx 36" off the floor with drops to all the...
  13. ScottM

    Wine rack design

    Though I have a new to me lathe I have yet to fall into the abyss called the "dark side". In fact the scroll saw was running tonight. While I can still function in the "light" I would like to build a wine rack. Nothing super fancy but nice. Size wise I am thinking like something to hold 12...
  14. Joe Scharle

    Design input, please

    I know many of you possess the soul of an artist; me, I only got the sole! I think this table is going to look real plain as it is, but I'm not sure just what to do to it. Any ideas?
  15. adowden

    Dining Room Table Design HELP?!?

    I am currently trying to design a George Nakashima inspired walnut slab dining room table. My biggest concern is that I know I would like a Frenchman's Cove II base design, but I cannot find dimensions anywhere. I have found lots of pictures and have done my best estimating scale, but with a...
  16. MikeL

    Iturra Design - I give them an "A"

    I purchased 2 bandsaw blades from Iturra Design earlier this year. Upon arrival, I discovered that the Bladerunner blade was 3/4" too long. There was no way I could make up that slack. I had given them the spec'd length over the phone and that is what I was billed for. After just one call...
    • MikeL
    • Thread
    • design give iturra
    • Replies: 5
    • Forum: Reviews
  17. C

    [Other-Main Site] Kudos! Great site design

    Status: Completed Assigned To:: Unassigned ===================================== To the Creators and Maintainers of NCWW: I am normally completely turned off by forum sites by I find NCWW so well designed that I find myself coming back day after day to see what's new. Great Job! Chris Tully:-D
    • cptully
    • Thread
    • design great kudos othermain
    • Replies: 1
    • Forum: Help Desk
  18. froglips

    Style, design, proportion?

    I know its almost blasphomy, but something has been on my mind (and I'm not just talking about my hair). Where do ya'll go for ideas in terms of style? Most mag's I read cover tools (no complaint), have projects/plans (just fine) and cover Woodworking news. I'm starting to hunger for...
  19. ptt49er

    Shelf Design Questions...

    After I got the crib built back in July, the wife started in on wanting a changing table. Personally I don't see what's wrong with using the folding table we have now but SWMBO wants one bad, so I guess there is no alternative. I am building the table in a design to mirror the crib and it's...
  20. Bas

    Design ideas for litter box cabinet

    I want to make a cabinet to house a cat litter box. Sort of like the one in the picture. Except I want the cabinet to have a single large pullout shelf. With fake doors on the front. And made of red oak, not mahogany. It will also double as a bird cage stand, not as an end table. So...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top