cypress

  1. nelsone

    Cypress Bent Lamination Questions

    I have been asked to make a hammock stand and am thinking of trying to do some bent lamination. I want to use cypress. The questions I have are how thick would you make the laminations and would TB3 be satisfactory for gluing the laminations. Here's a pic of the basic design I want to use.
  2. alleng

    protective finish for cypress

    ive tried the cabot stains,they are either too yellow or too dark brown. anyone ever use thompsons water seal?or is there something better suited that will keep the natural color. the natural colour in the cabot was realy yellow,didnt like it at all. thanks
    • alleng
    • Thread
    • cypress finish protective
    • Replies: 4
    • Forum: Finishing
  3. Splinter

    Ivey has some nice cypress

    Check out this nice cypress board. It is 19" wide and beautiful. Not a knot anywhere. He also had some other nice wood. I saw some really nice red oak but forgot to take a photo. If you need some nice wood and want to deal with a great guy give Ivey a call. He really has a nice setup and...
    • Splinter
    • Thread
    • cypress ivey nice
    • Replies: 6
    • Forum: Wood
  4. cypress table

    cypress table

    cypress table made from cypress obtained from Ivey via Jackleg
    • woodArtz
    • Media item
    • cypress
    • Comments: 0
    • Album: Furniture
  5. alleng

    cypress prices

    i hope this is the right forum for this, so moderators please correct if im wrong.i was just wondering what the going price per bf is for cypress lumber? some is dressed on 3 sides and some on 4.thanks
    • alleng
    • Thread
    • cypress prices
    • Replies: 6
    • Forum: Wood
  6. Ivey

    Load of cypress

    Picked up a few cypress logs Friday. Numbers on the end represent B/F.
    • Ivey
    • Thread
    • cypress load
    • Replies: 9
    • Forum: Wood
  7. S

    Australian Cypress

    Does anyone know were i can find some Australian Cypress lumber? I can find flooring but i need raw lumber for different projects throughout the job. Thanks
  8. Ivey

    cypress

    This is Reggies' (Farmtrac60) next order, except for the beams on top they belong to Jack (saw4you). cypress is nice looking wood..:icon_thum
    • Ivey
    • Thread
    • cypress
    • Replies: 14
    • Forum: Wood
  9. JackLeg

    Finishing Red Cedar and Cypress

    Anyone have a good suggestion as to what to use to finish ERC and Cypress for outdoor use? (Swings, outdoor furniture etc.) Would like to keep the natural look as much as possible with little to no "gloss." Any experience with any of the Thompson's Water Seal products?
    • JackLeg
    • Thread
    • cedar cypress finishing red
    • Replies: 8
    • Forum: Finishing
  10. JackLeg

    Cypress Lumber

    Anybody know of a source for cypress (or as the old timer's called it "juniper"?) If anyone is sawing any of this I'd appreciate a quote and dimensions available. Thanx.
  11. Larry Rose

    Cypress Top Tables

    LOML volunteered my services to the Church to make a pair of simple end tables for the ladies lounge. This is what I came up with. The tops are cypress and the under carriages soft maple painted and lightly distressed. I'll never pay for my habit if I keep this up.
  12. Ivey

    cypress

    Hello everyone, I got in a load of logs last week. There were w/oak, r/oak, sickeymore, ash, and cypress, a mixed load for sure. Sawed 900 bf of pretty syp for a customer today, and then about 200 bf of the cypress. That cypress sure is nice when you get to the middle of the log where the...
    • Ivey
    • Thread
    • cypress
    • Replies: 8
    • Forum: Wood
  13. T

    Looking to buy some cypress

    Evening all, I getting ready to teach a couple of the guys how to make a few Adirondack chairs and side tables for thier porches. I figure I will need approx. 75-100 bd ft, good rough lumber will do., as I have a planner and jointer. Likely want to purchase in the next couple of weeks...
  14. Larry Rose

    Aging Cypress

    A friend has asked me to rebuild an old garden bench. This thing is toast and should be used for fire wood. However, her father built it and she wants to use as much of the origional wood as possible. I will have to replace some broken and missing pieces. Does any one know of a way to "age" the...
  15. walnutjerry

    Cypress Projects

    I have recently finished a couple projects out of cypress,:eusa_clap both are finished with pure tung oil thinned with turpentine. Hopefully I have attached them to the post correctly.:roll: If not, they can be viewed in my album under "recent projects". One project is a door and the other...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top