custom

  1. wdkits1

    Custom Made

    Hi everyone After much pondering,soul searching and debating I have decided to jump off the deep end to try my hand at selling my wares on Custom Made, a site that after talking to other members there seems to be the place to be if you want to get lots of exposure for your woodworking. With...
  2. wdkits1

    I'm now on Custom Made

    Hi everyone After much pondering,soul searching and debating I have decided to jump off the deep end to try my hand at selling my wares on Custom Made, a site that after talking to other members there seems to be the place to be if you want to get lots of exposure for your woodworking. With...
  3. wdkits1

    Custom Keepsake Box

    Hi everyone Here are a couple of pics of my newest commission. It will be used as part of a wedding ceremony and incorporates a piece of Irish Connamara Marble. It measures 10.5" l x6.5"w x 7" t and weighs 9.5lbs .Lots of challenges with this design. I used fishtail oak for the wood. If you...
  4. C

    Custom sawmilling for you

    I'm new on here. Am doing some quartersawing of a white oak for a member and he said there would be members here who wanted to know about what I can do. I am just north of Chapel Hill and have a Woodmizer mill. You tell me what you want/need, I'll tell you if I can help. I've been sawing for...
  5. CrealBilly

    Mills Custom Sawing Final Kiln Dry Lumber Run

    Scott Smith, called me tonight to remind me I have a little over 500 Board Foot of 4/4 Quarter Sawn Red Oak out at his place. I sawed this Red Oak last winter form a few nice butt logs before I took my saw mill to my father in law in southern Illinois. I vaguely remember taking the lumber to...
    • CrealBilly
    • Thread
    • custom dry final kiln lumber mills run sawing
    • Replies: 21
    • Forum: Wood
  6. HF Lathe Shelf

    HF Lathe Shelf

    HF Lathe Custom Wooden Shelf with PVC tool holders
    • Badabing
    • Media item
    • custom hf holders lathe pvc shelf tool with wooden
    • Comments: 0
    • Album: My Shop
  7. Alex Franke

    My $6 Custom Branding Iron

    Hi all -- I haven't posted here in a while, and I realize that I forgot to share this one with you! I've wanted a custom branding iron for a while, but I didn't want to pay close to $200 for it. A couple months ago while flipping through Make magazine, I discovered a service in The...
  8. Douglas Robinson

    Need help on how to send a custom pen to a marine

    A person I know of was involved in a near-death hit-and-run bicycle accident in California. He is an elite athlete. A passing Navy man, Chief Petty Officer Thomas Sanchez, stopped at the scene and used supplies he had with him and his knowledge of first-aid to staunch the flow of blood from...
  9. D

    Custom WW website with lots of details

    This California craftsman gives lots of construction details, with photos, for many of his creations. Worth a look on a snowy day: http://www.chiselandbit.com/gallery.htm
  10. Duke chair

    Duke chair

    • dovetailer
    • Media item
    • chair chippendale custom duke
    • Comments: 0
    • Category: Member Galleries
  11. S

    Custom Bar in Cary

    I require a wet bar to be built in my basement. I have a general idea of what I require but have no definite plans. Artistic input would be appreciated. Is any one willing to take a look at the layout or able to provide a good reference? Thanks
  12. wdkits1

    Custom Closets

    I got the last set of shelves installed in the first closet. The owners were very pleased with the end product so now the work begins on closet # 2 which is a little bigger than the first. I used a total of 235 bd ft in closet #1 which was right in line with what I had figured. Did take a little...
  13. wdkits1

    Custom Closets

    Hi everyone, I really haven't been doing alot of scrolling lately except for a class that I've been teaching for some of the Seniors here in Midlothian at a place called -LLI( Lifetime Learning Institute).It's a place where seniors can go to learn all sorts of things like pottery, painting...
  14. goodmund

    Pricing custom cabinet work

    I'm curious how others price their cabinet work. I've bidding a job for some simple bath and kitchen cabinets and I've figured my cost for materials only to about $800. I'm not into trying to estimate my time because, frankly, I like to take my time to get it done right, plus I've never timed...
  15. R

    custom sawing

    I picked up a business card a while ago at a local mini mart: Custom Sawing with a wood mizer portable mill Tim's Custom Sawmill Tim Moore 252-299-1432 5069 Oakdale Rd. Wilson, NC I don't know him, but I had been looking around for someone in my area with a portable mill. Thought I'd...
  16. L

    Custom Furniture Makers?

    Hello All, I am new to this forum and hope someone can help me. I am hoping to find a custom furniture maker who can replicate an antique canopy or half tester bed in a king size. I love the look of these antique beds but not the small size. I understand this will not be an economical...
  17. Badabing

    Pen Question: how do you cut custom center bands?

    I mistakenly stumbled onto the option of making a custom center band for a pen*. I used a 2 inch piece of ebony, glued in a brass tube, turned it down to the diameter of the pen and then tried to cut slices off it (about the width of a standard center band). Well, this didn't work so good on...
    • Badabing
    • Thread
    • bands center custom cut pen question
    • Replies: 8
    • Forum: Woodturning
  18. Mike Davis

    Custom tool

    I made a set of calipers for a specific task. I hope the user will be happy with it.
  19. steviegwood

    2/11 Custom Hall Tree

    Hi Y'all, My Sister-in-law asked me to get creative and make a one of a kind hall tree for her son. He also has children so she wanted hooks at half height to teach the kids to hang their coats up also. Here is what I came up with. It is made of solid cherry and maple and stands about six feet...
  20. J

    Mills Custom Sawing

    Here's the presentation DaveO and I put together and I had the privilege of presenting to the fine folks at TWA back in September. Thanks
    • jeff...
    • Thread
    • custom mills sawing
    • Replies: 11
    • Forum: Wood

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top