complete

  1. ebarr

    Crown of Thorns complete

    I have been through some difficult times over the past few months and have not felt like being in the shop. I saw this pattern and it inspired me to get off my butt and do some work. It's not perfect by a long shot, and I would like to do a few more over the next month or so for gifts. But it...
  2. dino drosas

    occasional table complete

    I finally finished the three leg table. The wood is Amazakoue, I think part of Rosewood family
  3. sawduster

    Asheville to Youngsville complete

    Thanx to Dancam, toolferone and Doug Robinson , I am now the proud owner of my very own jointer :eusa_clap I will post a pic once I figure out how to do it properly :embaresse Big time thanx to Peter for the hook-up :icon_thum I made a 12" board out of two 6" boards today. It was not without...
  4. woodArtz

    Adirondack Set - Complete!

    Yeeehaaa! I'm done. The set is made based on some American Woodworker plans using some the cypress that I got from Reggie (via Ivey ;-)). I've made a bunch of these in the past using SYP and man what a pleasure to switch to cypress. I'll turn these over to the new owners next week and they will...
  5. Tarhead

    Sewing Room Cabinet Project Complete!

    Started this project back in the fall to help organize Mary Ann's sewing room. My intention was to make it look semi-built in and just used the dimensions of the space between the wall and the window and the general pattern of our kitchen/bath cabinets for the design. I made two base chests of...
  6. nelsone

    Artist Table Complete

    I finally finished the drawer units for the Artist's table I started a while back. This shouldn't have taken nearly as long as it did! Here is a picture of the complete set up. The corner work table and the two drawer units. And here's a pic of one of the drawer units.
  7. meika123

    Raleigh to Winston Salem complete

    Met with Gator, Mike and Barbara today at the Moose Cafe and completed the Pony Express transfer. Great to see you guys, and to put a face with some names. Thanks guys . And a BIG thanks goes out to Jim Fernhollowman as well for his generosity. You guys are the greatest...
  8. michaelgarner

    Clemmons to Hope Mills Complete!!!!! with PICS

    Hello friends, I was wondering if anyone is close to Clemmons to help me get a tool from up there? I would gladly help on fuel cost or beer funds. I was finally able to get a tool that I have wanted for a very long time. A sears Router-Crafter in wonderful condition. Thanks everyone and have a...
  9. C

    NEED New Tool to Complete Christmas Gifts

    I need some honest supporting feedback. Is it reasonable to tell LOYL that you need an OSS to complete 5 BS boxes that she wants to hand out to her friends before Christmas? I have never made a BS box but it looks like a LOT of sanding. I guess I should ask if the timeline is reasonable...
  10. DaveO

    Lizard cages complete....

    Well almost. I still have to stain and top coat them. But I am tickled pink to get to this point. These have taken me way longer that I ever figured. Luckily my client is very patient :eusa_pray:eusa_pray I finished the final elements this weekend. The tracks for the sliding glass door, filler...
  11. MikeH

    ARMY - ACU pen complete and shipped!

    As many of you know my brother is in the Army and is being deployed in a couple weeks. He is an officer in the 25th Infantry Division and they are known as Tropic Lightning. I wanted to make a pen for my brother to take with him and wanted to include the Division emblem. Here is the final pen. I...
  12. WoodWrangler

    Project Complete: Twin Beds

    11/18/2007 UPDATE: Added pics later in the post of project complete pics. Still going strong on the beds ... figured I'd provide a progress pic or two. Hoping to paint this week! Don't mind the mess! Gonna clean that up soon! 8-O
  13. Phil in Apex

    My biggest woodworking project ever is finally complete!!!

    It only took 2500 board feet of lumber, 30 bags of concrete (The 80lb variety), 45 pounds of screws and nails, 75 of the 5/8" Galvanized bolts, A few sawblades and drill bits, four months, and a very patient wife. The deck is done... I pretty much did the whole thing by myself with a bit of...
  14. T

    One Happy Wife; Project Complete!!

    I finally completed the built-inn chest of drawers with cubbies and the shoe rack for the LOML. The finish came out so good on the shoe rack that I threatened to display wood working magazines on it instead of using it to organize shoes. :eusa_danc I started this project the week of the...
  15. Douglas Robinson

    Check out this Auction for a complete shop

    THE SHOP IS LOCATED IN IDAHO, BUT THE PRICE INCLUDES SHIPPING.:-D http://cgi.ebay.com/Vintage-Delta-Rockwell-Woodshop-Machinery-Tools-NICE_W0QQitemZ290143301544QQihZ019QQcategoryZ42938QQssPageNameZWDVWQQrdZ1QQcmdZViewItem Doug
  16. Sabre2

    End tables complete

    Here are the end tables I was making for my wife as a Mother's Day gift. Modified plans from an old Woodsmith. The panels are all resawn to 1/4" and book matched. The doors and the right side on the one top are from the same board. I was leery about making the doors from a solid piece, but I...
  17. woodguy1975

    Moak Restoration/Upgrade Complete - Pics time

    Well, my goal was to complete the 36" bandsaw rebuild/upgrade before I leave again for China. All bearings have been replaced, brakes replaced with electronic braking, new lower door, and new blade guard fabricated by me. A picture is worth a 1000 words so it is on with the pictures. For the...
  18. Bryan S

    Planer stand complete

    Finished first project The planer stand came along nicely after some advice from many of you. Alot of first here for me. The first time I made a project with no screws (except the hinges of course) and the most complex glue up. First time with dados. Frst time face and edge jointing on the...
  19. Travis Porter

    Daughter's dresser - complete

    I sprayed the Target water based shellac, and like David said, it is different. I screwed up and didn't have enough light and ended up having a few runs. Fortunately, it sanded out very easily and I was able to top coat it the next night. I ended up spraying 7 coats of Target Coatings USL...
  20. Travis Porter

    Daughter's dresser - construction complete

    I have been somewhat lazy in getting this dresser done. I screwed up the bottom and last drawer and cut the rabbets on the front the wrong way for the c*ck bead. So, I had to work out getting some wood that matched the rest of the drawers pretty well, and you know how it goes. So, I have...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top