Sorry it has taken so long, my little shop accident left me out of the shop last week.
The tool list is as follows:
# 3 or #5 gouge = 5, 6 or 8mm if Pfiel tool 1/4" to 3/8 if a Flexcut tool
#12 = 3 to 4mm if Pfiel tool 60 degree parting tool 3/16" to 3/8" Flexcut
3/8"...
I have finally decided to offer carving classes on a broader basis. I have taught an apprentice, several students and have helped several retired gentlemen over the years. Carving has been my career for the past 32 years.
I am able to offer beginning to advanced classes in relief and three...
Have you ever thought you might like to do relief carving, but didn’t know where or how to start? Well, here’s your opportunity. Pete (PeteM) and Andy (CarvedTones) have generously offered their time and expertise to assist in a free, hands-on workshop for beginners who want to learn relief...
I've been asked how I got stared carving so I decided to do a little write-up listing some of the resources I found helpful.
It's available in the download library here:
http://www.ncwoodworker.net/forums/downloads.php?do=file&id=329
Take a look and if you have any questions, comments...