bits

  1. F

    Clearance for Router Bushings?

    Hi all, I'm settling in to build some router jigs, mostly for mortising and whatnot. Anyway, I trying to match bits up with two Whiteside bushing guides I bought awhile back. They both have pins to line them up properly and they're much better than the Porter Cable bushing guides I bought way...
  2. Extra Bits

    Extra Bits

  3. Brad point bit box

    Brad point bit box

  4. Brad point box

    Brad point box

    Ash dovetailed box for my brad point bits
  5. JRD

    Forstner Bits

    Looking for some advice here. My set of Forstner bits had become very dull, probably because of overheating them. I've purchased a new set but before throwing the old ones away, I've got to ask, '"can they be resharpened?" If so, where can I take them? It kills me to throw them out if...
  6. Square_Bit_1

    Square_Bit_1

  7. Carbide_bits

    Carbide_bits

  8. merrill77

    Anyone tried Rockler's Power Bore bits?

    Anyone tried these bits? The review on their site seem positive, but I'm curious if anyone here can confirm or deny their claims? TIA!
  9. MarkE

    Router bits for $9.99 @ Peachtree

    Peachtree has Stone Mountain carbide router bits on sale for $9.99 each. Time to stock up or replace. http://www.ptreeusa.com/edirect_092711.htm
  10. Tommy Smith

    Colt Maxicut Forstner Bits

    After frying my set of Wood River Forstner bits making a pepper mill from Honduran Rosewood I invested in a set of Colt Maxicuts. As would be expected the difference was night and day. They cut so well I couldn't believe how easily they were moving thru the blank, had to make myself go slow. I...
  11. drw

    Different Drill Bits or Better Technique?

    How do you minimize/eliminate tear-out where the drill bit breaks through on the backside of boards? Today I had to drill several 3/8" holes in some SYP using a cordless drill and brad-point drill bits. Initially, I began with the 3/8 bit, but in an effort to solve the problem I tried starting...
  12. jcz

    Router bits?

    I have never had a router and only used a borrowed one a couple times. Im going to have to learn the ins and outs by trial and error. Now to get started I need to get some bits. I am looking into getting this set from MLCS...
  13. S

    Router Bits

    Looking at upgrading some of my bits and wonder if anyone has used any of the new triplewing bits. Specifically does a triplewing Freud or MCLS bit out perform a comparable whiteside bit.
  14. Joe Scharle

    Impact driver won't hold bits

    This w/e I had to remove some 1/4" lag bolts from brick. When I tried to remove the drive adapter...it wouldn't release the shank. Pushing and pulling finanly got it loose. However, since then, it won't latch (hold) any bit. Any ideas? Service center is closed until Monday.
  15. Drill bit storage cabinet

    Drill bit storage cabinet

  16. Drill bit storage cabinet

    Drill bit storage cabinet

    Swing out box/shelf for access to back wall
  17. Drill bit storage cabinet

    Drill bit storage cabinet

    Swing out box/shelf for access to back wall
  18. Drill bit storage cabinet

    Drill bit storage cabinet

    Swing out box/shelf for access to back wall
  19. Drill bit storage cabinet

    Drill bit storage cabinet

  20. Drill bit storage cabinet

    Drill bit storage cabinet

Our Sponsors

LATEST FOR SALE LISTINGS

Top