addition

  1. mpholway

    Exciting addition to the 2024 picnic - Stay Tuned

    Attention all NCWW members. This year, May 18, 2024, we will be making an exciting addition to our annual picnic. Please check back with us on Sunday, April 14th to see what all of the fuss is about.
  2. B

    Shop addition updates - WARNING,pic heavy

    It has been a while since I've posted shop build updates with the holidays, etc. but here goes. Used holiday visitor labor to relocate heavy stuff. Thanks again to Greg Bender who stopped by at an opportune time! Built a wood storage rack this weekend - mostly for sheet goods. View image in...
  3. L

    Router table addition to table saw

    I'm thinking about getting a Bench Dog cast iron router top to add to my Saw Stop table saw and would like to have comments from anyone that has experience with this type set up.
  4. DWSmith

    Shop Addition

    Prior to last winter I installed a propane heater in my shop. I was assured it would keep the shop comfortable. Such was not the case. I blew through over $2000 in propane and that hurt the wallet and only raised the temperature in the shop to a chilly 55 tp 60 degrees. My wife fussed all...
  5. cskipper

    Neat addition to Hegner scroll saw

    One of the few things that annoyed me about my Hegner was that the blower was fixed and blew the dust toward you. Mike (at the Flying Dutchman) sells a flexible blower as a replacement for this saw. Obviously it is not a genuine Hegner part, but it works perfectly! :icon_thum He also sells a...
  6. Tzapp1

    Clemmons addition to the NCWW family

    Hi I am Tina and new to woodworking. I have lucked out and taken over a fully equipped shop and all its contents:rotflm: I am learning the fine art of woodworking from my husband Nick (NZAPP1). I have posted some bowls in Nick's gallery but plan on posting pics soon. I am looking forward to...
    • Tzapp1
    • Thread
    • addition clemmons family ncww
    • Replies: 18
    • Forum: Who We Are
  7. T

    Kitchen shelf addition

    I made the orginal flat shelf for the microwave 8 years ago. This week I raised the oven 4 inches by adding the 3 drawers and also added the shelf on the side. With another current thread questioning what woodworking is, I will call this cabinet work. It is all plywood, pocket screws, iron on...
  8. PChristy

    Addition to a weed pot

    I turned this a few weeks ago from one that I messed up while turning it - It got out of round some how :dontknow: So instead of throwing it away I drilled and tap the bottom and was planning on making a bottle stopper out of it - but came up with this instead - I have already posted a picture...
  9. Makinsawdust

    New shop addition (good deal gloat)

    I been wanting to add a cabinet under my Cab Saw for a long time. I seem to never have had the time or will to make one. I was browsing the big blue box on Thursday and found a 10 piece box of cabinet pulls for $12 on the clearance table. Then I preceded on back in the store and found a...
  10. C

    A Recent (Free) Shop Addition

    My first successful photo post! About 2 weeks ago a friend gave me this (FREE). It was a rusty pile of pieces when I got it (spent last Winter outside). A new power switch and some electrical debug, Some heavy de-rusting (ROS & 60 grit), a new belt and disk, about 6 hours labor, and it's...
  11. bluthart

    Addition to Santa Wood Run to Raleigh, NC

    With Rod's blessing, I have decided to see if any of you would be interested in some of my lumber as well. Without stepping on any toes here hopefully, I have some species to offer as well. I would plan on making the same stops as Rod as long as there is some interest. I need to make room in my...
  12. woodnick

    Latest Shop Addition

    It's a Delta/Rockwell 46-111
  13. WoodWrangler

    Bid on Shed Addition?

    Here's the deal ... I REALLY need to build a medium size shed off the back of my garage for general storage -- as well as a dust collector in the future. I've laid it out and was (am?) thinking about doing it myself -- but reality is starting to set in and I'm thinking I might want to get some...
  14. Steve W

    Porch Addition

    OK, folks, here's the plan: We want a screened-in porch on the back of our two-story Williamsburg colonial-revival. Usually this is a fairly straightforward proposition -- I've done this on a previous house (New England-style "colonial"). The New England one was easy, as I just built a roof...
  15. 4yanks

    Latest addition

    I have been working on fitting out my new shop since we moved to Southern Pines a year and a half ago. Two trips to Afghanistan have slowed me up considerably. Today I hung a set of cabinets in one corner of the shop to hold power tools and frequently used supplies. It compliments the corner...
  16. Ralrick

    New Addition to the shop and new wood worker

    I picked up a new Jet lathe from Elliot a couple weeks ago and just got it up and running in the shop. My son had done some turning in his middle school so this was a tool addition to get him in the shop. He was out there giving it a try last night and making some saw dust (broken wrist is...
  17. DaveO

    New addition to the gang

    I would like to welcome Jon (jtodd71) as a Moderator. He asked me about what he could do to help the operations of the forum, and I told him if he was willing to make the sacrifice that he could toil away in the underbelly of the forum with the rest of us sweat-hogs. I have currently placed him...
  18. J

    Addition to Raleigh KD Lumber run #3

    Wanted to let you guys know that along with KD lumber run #3 I'll also be bringing a bunch of BW and WBC 4x4's and short pieces from a local furniture builder named Billy. There are also some of those fancy table legs and and an old walnut carving too. Billy said some of the pieces have been...
    • jeff...
    • Thread
    • addition lumber raleigh run
    • Replies: 4
    • Forum: Wood
  19. MikeH

    New addition to the ptt49er family

    Well I hope I'm not stealing his thunder but Phillip (ptt49er) and his wife had Joel this morning. He was 7 lbs. 5oz. and 20.5" long. He is going to try sending me pics from his Dad's Blackberry at some point today. If that doesn't happen then it will probably be the weekend before he can...
  20. Larry Rose

    Update on shop addition

    We finally got most of the outside work done. Just a little boxing and trim and its ready for paint. The inside has been rough wired and is ready for insulation and paneling. Has any body got any ideas about paint color inside? I was thinking white but with all the windows and the floresent...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top