8 or 4

  1. LeftyTom

    WTB: 8/4 Ash

    I need 8/4 ash in 8 ft lengths; I can work with four in 6ft lengths and eight in 8ft lengths. Or I will take twelve milled 8ft ash 2x4's.
  2. NCGrimbo

    Routing through 8/4 wood.

    I'm getting ready to work on a new project and I'll be doing something that I've never done before and need some advice. I'm going to be routing wavy lines on some different species of wood and then glueing them together to form a single piece of wood. I found this image as an example of what...
  3. DWSmith

    8/4 x 10' Hard Maple

    On Monday 9/12 I will have available over 500 bd ft 8/4 x 10' hard maple for $3.95 per bd ft. If anyone wants some contact me at 336 803-0434 (cell) or 336 474-0434 (shop). Edited to reflect the length at 10 feet not 10 inches. My mistake. Various widths.
    • DWSmith
    • Thread
    • 8 or 4 8 or 4 x 10 hard maple
    • Replies: 5
    • Forum: Wood
  4. Mike Davis

    8/4 hardwood wanted

    8/4 purpleheart, hard tiger maple and other colorful hardwoods wanted, scraps and shorts. Short pieces are fine at least 2 inches wide and 6 inches long. Not looking for premium retail priced turning squares. This is for turning tops for Haiti, longer pieces may be used for turning and...
    • Mike Davis
    • Thread
    • 8 or 4 hardwood wanted
    • Replies: 1
    • Forum: Wood
  5. C

    Source for 8/4 walnut - chair stock

    I need a few more boards for DR chairs. Been a year since I finished the table and someone that I live with here (no names given :nah:) thinks I should start making some progress. :gar-La; I probably need 3 more boards depending on width. AD would be fine so long as it is DRY. Chuck
    • cpowell
    • Thread
    • 8 or 4 chair source stock walnut
    • Replies: 4
    • Forum: Wood
  6. decibel

    8/4 purpleheart Charlotte?

    Anybody know where I can get some at around charlotte without paying with one of my appendages? If not looks the Hardwood Store has what I'm looking for but if I got there I fear I'll come back home with a lot more than just purpleheart. :gar-La;
    • decibel
    • Thread
    • 8 or 4 charlotte purpleheart
    • Replies: 2
    • Forum: Wood
  7. bobby g

    8/4 Wanut Needed

    A friend of mine has a commission and one component of the piece requires a thick walnut board. It needs to be 8/4 X 16 X 4 feet, ideally one piece. He could make it out of 2 pieces of 8" wide stock if the grain is straight and would match-up nicely. His shop is in the Pittsboro, NC area. Do you...
  8. bobby g

    8/4 Poplar cutoff needed

    I need to get a hold of a piece of clear, 8/4 poplar, about 9" X 14". I'm going to use this to make a birthday present (name puzzle stool) for a fine young man. I am willing to pay for it and pick it up. Thanks, bobby g
  9. R

    Looking for 8/4 or 12/4 Zebrawood, 70-100bf... Somewhere in NC!

    If anyone knows of places (other than the ones I list below, from whom I am skeptically awaiting a response) that might carry 8/4 or 12/4 Zebrawood, please let me know. I am going to need 70 to 100bf of Zebrawood lumber, depending on the thickness. The places I'm aware of and awaiting a call...
  10. Kyle

    8/4 Walnut 100 bf 3.90

    I have a 100 bf available of 8/4 Walnut #1 and better, DRY 6-8 lengths no sap, 6" and wider for only 3.90 a board foot. Thanks, Kyle
    • Kyle
    • Thread
    • 100 390 8 or 4 walnut
    • Replies: 4
    • Forum: Wood
  11. HMH

    Save me a trip? Need 8/4 Cherry in/around Sanford/ RTP

    Hey Folks, I am in need of about 8bf of 8/4 Cherry, (roughly a 6"W x8'L board), to use for legs. I have plenty of 4/4, (already surfaced to 3/4"), and thought hard about laminating 3 of them to get a 1.3/4" leg, but I'm not sure I'd be happy with the resulting seams. I've called the local...
  12. D

    8/4 Cypress

    I am looking for a source for dried 8/4 cypress in the Greenville area. I would prefer #1 or #2. Dcraig2262@gmail.com
  13. eyekode

    White Oak 4/4 and 8/4 - .75 per bd/ft

    I know you guys can (and do) read craigslist but I had to post this one: http://raleigh.craigslist.org/mat/1520408880.html He just finished building a porch with this some of this wood (looks great by the way). I drove out and met Paul today. A really nice guy and the wood is nice too :)...
  14. C

    4/4, 8/4 Flaming Birch, 8/4 FAS 10 and wider Walnut

    Hey guys, Among other things, we just got in some Flaming Birch, Birdseye Maple and 8/4 FAS 10" and wider Walnut! All kiln dried.... 4/4 Flaming Birch - $6.00/bf 8/4 Flaming Birch - $6.50/bf 8/4 FAS Walnut 10" and wider - $6.50/bf I posted some pics in the member gallery! Also, as...
  15. PeteM

    4/4 and 8/4 curly maple in Charlotte CL

    http://charlotte.craigslist.org/mat/1292256140.html Not mine but it was listed under "materials" so it might go unnoticed. pete
  16. PeteM

    Looking for 8/4 figured maple

    A friend of mine wants a maple board; minimum size = 2" thick, 9" wide, 24" long for a guitar body. He wants some good figure (not ambrosia) but it doesn't have to be "totally awesome" :wink_smil (It does have to be dry). If you have some let me know and I'll pass it along to him. pete
    • PeteM
    • Thread
    • 8 or 4 figured maple
    • Replies: 1
    • Forum: Wood
  17. CrealBilly

    looking for a small peice of 8/4 RO

    Anyone got a small piece of 8/4 Red Oak - enough to make 4) 1 3/4" sq x 4' long legs? Thanks
    • CrealBilly
    • Thread
    • 8 or 4 peice small
    • Replies: 7
    • Forum: Wood
  18. lsorenson

    I am looking for 8/4 Hard Maple...

    Wife is after me for a couple of cutting boards and I can put it off no longer...! Planning on making a couple of butcher block @ 12x18x2 so 10bf should give me enough to build 2 or 3 depending on the wood... Although its only 10bf I would move the quantity up for a good resource!!! I am in...
  19. CarvedTones

    looking for a piece or two of 8/4 hickory

    An ideal piece would be a 6' long 2"x12" that was flat sawn right through the center of the pith. I am not sure who has 8/4 hickory around Raleigh in small quatities, that would let me pick through. I won't be at the picnic due to spring Y camp conflict, but if someone will have some there I...
    • CarvedTones
    • Thread
    • 8 or 4 hickory piece
    • Replies: 0
    • Forum: Wood
  20. CrealBilly

    8/4 x 24 x 12' WO

    I have a 8/4 WO board that's 24" wide and 12' long (48BF) and pretty clean. I'm trying to figure out if I could make 2 end tables and a coffee table out of the one board. I'm picturing a 24" square top for the end tables and a 36" x 24" top for the coffee table 2" sq legs and a 1" aprons. I...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top