64a

  1. Riving Knife & ZC Insert

    Riving Knife & ZC Insert

    Shop made riving knife and zero clearance insert.
  2. Zero Clearance Insert

    Zero Clearance Insert

    Custom made zero clearance insert made to accept riving knife.
  3. Riving Knife Installed.

    Riving Knife Installed.

  4. Riving Knife Installed.

    Riving Knife Installed.

  5. Riving Knife Installed.

    Riving Knife Installed.

  6. Riving Knife Installed.

    Riving Knife Installed.

  7. Riving Knife Attacment.

    Riving Knife Attacment.

    Riving Knife attaches to original guard mount.
  8. Shop-made riving knifte

    Shop-made riving knifte

  9. Shop-made riving knifte

    Shop-made riving knifte

  10. Shop-made riving knifte

    Shop-made riving knifte

  11. B

    powermatic 64A VS Craftsman contractor saw

    My Craftsman saw is having issues and i have always despised the fence. There is a PM 64A for sale in my area for 650. Curious if anyone in the forum has one and what their thoughts are on it. Is it a significant upgrade or should i just bite the bullet and spend a few hundred more for a used...
  12. Adjustable Feet

    Adjustable Feet

    Adjustable feet makes it easy to accommodate uneven floors.
  13. Legs Folded Up

    Legs Folded Up

    To fold the legs up, remove the Locking Knobs and swing the legs assembly to the right.
  14. Leg Hinge & Locking Knob

    Leg Hinge & Locking Knob

    The 5/16'' hinge bolt is attached to 1-1/4'' angle iron used for mounting out-feed table. Locking knob is a lawnmower handle replacement knob, epoxied to 5/16'' threaded rod. Keywords: PowerMatic 64A Fold-up Outfeed Table Tablesaw Support Leg
  15. Fold-up Support Legs

    Fold-up Support Legs

    Outboard support legs are required to accommodate additional weight of extension table, accessory drawer, and outfeed table. Remove two locking screws to fold the legs up to move the saw.
  16. KC7CN

    PowerMatic 64A Outfeed Table - Completed

    PowerMatic 64A Fold-Down Out-feed Table. This project took a lot more time than I thought it would! You can see more pictures, with additional details, in my photo album. http://www.ncwoodworker.net/pp/showgallery.php?cat=1012 It's amazing how many ways you can build an out-feed table...
  17. Miter Gauge Dado Alignment Jig

    Miter Gauge Dado Alignment Jig

    This jig is used to align the dado slots to the table saw miter track. The jig consists of a 2-3/4" x 45" piece of hardwood. Plane thickness to 3/4"; for snug fit in the miter track. A 21" x 1-1/4" notch on one end is required to clear the template.
  18. Miter Gauge T-Track

    Miter Gauge T-Track

    Additional 5/8'' support blocks required under miter T-track.
  19. PowerMatic 64A Outfeed Table

    PowerMatic 64A Outfeed Table

    Note how the extra 5'' of miter track is utilized with the cross-cut sled.
  20. PowerMatic 64A Outfeed Table

    PowerMatic 64A Outfeed Table

    This photograph illustrates how much safer it will be to use this large crosscut sled with the outfeed table.

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top