2nd

  1. In Progress #3

    In Progress #3

  2. In Progress #2

    In Progress #2

  3. In Progress #1

    In Progress #1

  4. H

    Grip 2nd time on a twice turned piece?

    How do YOU grip a twice turned piece when the tenon or recess has become oblong upon drying - as it always seems to? Henry W
  5. Shamrock

    2nd AnnualCharlotte area Xmas Demo-interest?

    Revised Update 12/10 (18 members and counting) Looks like we are on for Tues the 20th 6 pm - till? (probably till the shine runs out) Chime in and let me know and we'll compile a list of those that can make it Here's the growing list for the 20th so far: Mike (me) Pete M Kevin Matt Phil...
  6. MrAudio815

    2nd Segmented Turning~!

    Hello NCWW's, Here is my second segmented turning. Not as good as others but I am very happy with it~! :icon_cheers Comments/Criticism is highly encouraged - :gar-Bi 7" tall x 7-3/4" wide with 241 pieces of Walnut, Bloodwood, Black Cherry & Spalted Curly Maple Thanks for looking...
  7. Mike Davis

    2nd Free Sharpening Workshop Feb. 19

    This will be at Bill's shop in Liberty. I have the following members listed for this work shop. James Davis James Davis from Roxboro, NC JCraig Jerry from Greensboro, NC cptully Chris from Raleigh, NC ScottM Scott from Littleton, NC Berta Roberta from Cameron, NC Bill Clemmons Bill...
  8. Canuck

    2nd Writing Desk Done!

    Here is the second small writing desk that I completed today for my second youngest daughter. Built using pretty much the last of the white oak that got from Scott Smith late last December.:icon_thum With this desk I tried a couple of things different. Once I completed the leg to apron...
  9. Tar Heel

    2nd week donation report

    We got off to a good start, and at the end of the first week we had 10 donations for a total of $400. Activity has dropped off a bit as we now have, at the end of the second week, 13 donations for a total of $465. Donations are very important to the financial well-being of NCWW and your...
  10. MrAudio815

    WIfe's 2nd Surgery

    Hey Everyone, It's been a while, I have been trying to spend as much quality time with my wife before she went in for her 2nd surgery.:gar-Bi Sorry I haven't been participating much. :gar-Cr Her 2nd surgery was on Monday and all went well, they were able to due 2 surgerys in one. She is...
  11. dpsnyder

    My 2nd turning lesson - bottle stoppers

    Just finished up lesson #2 at the WoodArtz school of woodturning :gar-Bi Tried my hand at a bottle stopper. Used a piece of the leftover Lyptus wood from a previous project. I won't post every little project, but this was a milestone for me. Here's the pic... Enjoy, Dan
  12. CrealBilly

    Sapwood 2nd high poster?

    What's up with that - Welcome #2 Roger
  13. K

    2nd picture post-chimney cupboard

    www.ncwoodworker.net/pp/data/500/medium/0055.JPG The story behind this chimney cupboard is not my magnificent woodworking ability:no: but the wood used to build it. I built this piece about 5 years ago. I have a lot of catching up to do on posting pictures:eusa_danc. There is a 3rd...
  14. dino drosas

    2nd Bowl Done. Me Too!

    Here is the second bowl completed using the Ci1 & 2 tools. Turned out pretty good considering my turning ability. As I had mentioned, I don't think that turning is for me. I will most likely place my lathe in the classifieds for sale in the very near future. The lathe is a General (made in...
  15. ScottM

    2nd menu bar

    I am staring this thread here for a reason. As a moderator I use the new "post view" to keep track of postings. I am sure others of us do the same. It would be real nice if we could have a second menu you bar at the bottom of the page so we do not have to scroll back up to the top in order to...
  16. DaveO

    2nd top poster....

    Sweet! I am off the hook. I hope that this was a planned mod :eusa_thin It's nice to see someone else's name up there...and imagine that it's Jeff.... he's come a long way, baby :icon_thum:eusa_danc:icon_thum:eusa_clap:eusa_clap:eusa_clap:eusa_clap:eusa_clap Dave:-)
  17. Kyle

    2nd Piedmont Craftsmen meeting

    3rd Sunday in March 1-3:30 or a tad longer. I believe the agreed upon topic is Walking sticks by Robert Underwood. I really meant to post this earlier. Robert let me know if you need more time or want to delay into April. Please list if you have a desire to attend. I also need to...
  18. nelsone

    2nd Bowl

    This is my 2nd bowl I've turned. I had a lot of trouble with tearout and did my best to sand it out. The wood is some spalted river birch one of the neighbors cut down, finished with paste wax only.
  19. SteveColes

    2nd Anniversery

    Today is the second anniversery of NCWW:neener:
  20. nelsone

    2nd euro

    I was planning on getting a couple done today, but LOML had other ideas and I ended up doing some yard work:-? Oh well, at least I had a chance to get one done! This is some more of the ambrosia maple, but I found a spot with some interesting grain. I put a little med brown dye on it to see what...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top