1 or 4

  1. A

    Triton 3 1/4 HP Router

    I saw, through one of you guys, that Woodcraft has the Triton 3.25 hp router on sale. I am interested in this router mostly for use as a router table router. The videos on the woodcraft website illustrate that the router can be raised and lower from above the table with the use of a crank...
  2. T

    best way to get 1/2 , 3/8 and 1/4 matterial

    this might sound like a stupid question but I am more looking for workflow information how can I spend the least amount of time and waste the least amount of material when when needing thinner stock example needing 1/2 material if 4/4 = 1" then this would not be thick enough to get 2 pieces...
  3. Mike Camp

    1/4 Sheet Finishing Sander Recommendations?

    Anyone have any recommendations for a 1/4 sheet finishing sander? It looks like all the big names (PC, Bosch, Dewalt, Milwaukee, etc.) are all in the $50 - $75 range which is where I'd like to keep the price.
  4. Glennbear

    1/4 Sheet Sander Recall

    The CPSC has announced the recall of Ryobi 1/4 sheet sanders. Hopefully no one has any of these sanders which apparently can have a penchant for spitting out shrapnel. :eek: http://www.cpsc.gov/cpscpub/prerel/prhtml11/11216.html
  5. R

    triton 3 1/4

    While they last: http://www.ptreeusa.com/edirect_020811.htm At $175 plus shipping I suspect they'll go fast. Triton Dual Mode Precision 3-1/4 hp Router Model No TRA001 $125.00 Off Regular Price Of $299.99 Your E-Direct Price $174.99 Hurry Only 200 At This Price !!! <H1>Triton Dual Mode...
  6. SgtSnafu

    1/4" White pegboard in Greensboro NC

    I believe I found a deal in 1/4" white pegboard. It is at the Habitat For Humanity ReStore, on High-Point Road in Greensboro. If you go, they are in a room off to the left at the rear of the store, where the other building materials and such are... This is the real 1/4" thick stuff (not the...
  7. T

    Hitachi 2 1/4 H.P.Router $100.11 shipped

    http://www.tylertool.com/hitachi15.html, enter code TT100110 into the code box to get 20% off. Better hurry goin fast,Tommyt(vicariously spendin your money without bein there:):rotflm:
  8. S

    1/4" Cherry

    Helo, I am in need of some 1/4" Cherry plywood for some cabinet ends. Can anyone help? Thanks, Stephen
    • swlaw72
    • Thread
    • 1 or 4 cherry
    • Replies: 1
    • Forum: Wood
  9. J

    Bosch 3 1/4 HP router - $130 (Wilmington)not mine

    Bosch 3 1/4 HP router in very good condition - $130 (Wilmington) Date: 2010-08-02, 10:14AM EDT Reply to: sale-dmr6r-1876149487@craigslist.org [Errors when replying to ads?] Bosch 1619EVS router. Variable speed, 3 1/4 horsepower. Also includes template guide accessory package. Works...
  10. kirkpj01

    1/4" mortising bit

    Does anyone know where someone (me :gar-Bi) can buy just the auger part of a hollow chisel mortising set? I generally don't make 1/4" mortises for doors but available stock dictated that. Seems like the auger is rather fragile even though I took things slow and easy.
  11. KenOfCary

    1/4" Hardboard Source in the Cary area

    Anyone found a source for 1/4" Hardboard anywhere around Cary, Raleigh, Apex, Etc. The Lowes and Home Depot's in the area all seem to have 1/8" and 3/16" but no 1/4". Any leads appreciated.
  12. froglips

    1/4" bundle packs at the Hardwood Store.....

    I think this is the right forum. I was over at the Hardwood Store today, with Mr. Ed Brant. In the offcut section, they have bundles of planed/joined 1/4 single species hardwood. Most 3" to 6" x 12" to 36" lenghts. Poplar, maple, oak and cedar. No clue what they are/were for. I...
  13. S

    PC 342KR 1/4 Sheet Palm Sander-$28-Tooliday

    Know Someone That would like one of these deals? PorterCable 342KR Recon 1/4 Sheet Palm Sander Kit Feb 10, 2010 01:00 am This is the sander you've been searching for. The Porter Cable Factory Reconditioned 342K features a powerful 2.4 Amp motor and lightweight, compact frame that you can...
  14. J

    55 piece, 1/4 hex drive set- free??

    Was in Lowes tonight, and they have their Kobalt 55 piece , 1/4" hex drive drill sets for $9.97. In the box is a $10 off $50 coupon, good through 01-31-10. If you are going to make a $50 purchase between now and 01-31-10, this means Lowes is paying you $0.03 :gar-La;to get one of these sets...
  15. D

    1/4" pegboard

    Found some pretty decent used pegboard at Consignment Savings and they are located at 2689 E. Main St. in Lincolnton. (That's in the Boger City section) Ph. no. is 704-732-6906, if anyone is interested. Anyway, he's got what looks to be 4X8 sheets and some smaller pieces and I didn't really...
  16. T

    1/4 Router Bit set @ HD, $7.50

    This...
  17. PChristy

    1/4 Birch

    Anyone know where I can get some 1/4 Birch ply good both sides close to me in Lexington -
  18. B

    Freud 2 1/4 HP plunge router deal-1 day only

    Lowe's has an online daily (Friday 12/12) special on a Freud 2 1/4 HP plunge router regularly $249 to 99.97 so you'll need to act fast. Freud routers generally get decent reviews but I do not own one so make no personal endorsement.:tool...
  19. rick7938

    1/4 Sheet Finish Sander

    My old B&D finish sander finally bit the dust today. Anyone have any suggestions for a replacement? I have looked at so many on the internet and it is hard to decide without using them all. I would like to get as much comfort, durability, and value as possible. Thanks for any feedback.
  20. L

    1/4" plywood

    I need 1/4" oak plywood for a project (inside panels for desk). I found 5.2 mm at Lowe's, when checking with Ask Jeeves, i find that it is smaller than 1/4". 5mm = 3/16th and 6mm = just under 1/4". I think this will work but I appreciate knowledge from the group. BTW, the plywood looks very...

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top