Search results

  1. Toddler

    Equipment set up

    Hi Guys, Despite my optimistic planning, it's now been several years since I've had any space for a wood shop. BUT, after countless delays, we're now about 3 weeks from moving into our new home. (Which means it will be mostly done). The basement will have plenty of room for a shop, and I already...
  2. Toddler

    Ends tomorrow! MINIMAX CU300 SMART Multimachine. Current bid is under $2000 (new is over 14K)

    Hi Guys, I haven't been around much, but I had to sign in to mention this IRS Auction. This is not my machine. It's 4+ hours drive from me, but I was still going to bid it up to 3000. However, I put a bid in on a new SawStop today, and surprisingly, I won that for under 2000, so I won't...
  3. Toddler

    Can I ask for contractor recommendations here?

    Hey guys, It's been almost 2 years since I've had time to do any real woodworking, but my wife and I are about to undertake our largest building project ever, a new house. The construction plans are being drawn, and we're currently collecting the information we will need to get permits and...
  4. Toddler

    grizzly 16" bandsaw on CL, new, $500! ! !

    Not mine, and 5 hours old already and I don't know the model http://raleigh.craigslist.org/tls/1406955403.html Seems like a nice deal for someone!
  5. Toddler

    Help resawing 13" x 18" quilted maple

    Hi everyone, Usually, when my 10" resaw is too small, I go over to the university and they can help me out. But their max capacity is 12". So if you can cut this block and would be willing to help me out, I'd appreciate it. I'm not looking to make veneers, Just 3 or 4 slices...
  6. Toddler

    Kaeser rotary screw with tank and dryer $500

    Not mine. Never seen one at that price! http://raleigh.craigslist.org/tls/1153082261.html
  7. Toddler

    60 gallon porter cable compressor. 275.00 says new

    http://raleigh.craigslist.org/tls/1109609951.html Not mine. Had to show up 1 week after I bought one LOL. This is the model. It's not really a 7hp, obviously :) http://www.toolbarn.com/product/portercable/CPLC7060V/
  8. Toddler

    Safety / pressure release quick couplings at Grainger

    I know they're not exactly woodworking tools, but I love safety stuff and bought 4 of these couplers from Grainger to go with my new compressor. They're on sale for about $6.50 depending on size (the couplers, not the compressor). That's 70% off or so while supplies last. No idea how many are...
  9. Toddler

    compressor at granger now $132 from $363

    http://www.grainger.com/Grainger/items/3JR85 Don't know what S&H will cost.
  10. Toddler

    New Delta 50-720 Dust collector $129 in Durham

    It's the floor model at the Lowes on 15/501 in Durham. This is the model: http://www.tools-plus.com/delta-50-720.html?utm_medium=feed&utm_source=froogle&utm_term=DEL50-720 It's assembled, not boxed. Seems like a good price, and I'm pretty sure it'll have the full warranty, but call to...
  11. Toddler

    Amazing Compressor: Only if you have 3 phase

    There's still a week left in the auction, but IRS has a Kaeser SK19 compressor posted in Lexington, NC which only at $700 right now. They seem to be 4-6K used and new they're over 12k, so that price seems "a bit low". The air tank isn't shown in the picture, but it says it's included along...
  12. Toddler

    Anyone set up to resaw 14.5"?

    Edit: Never Mind The Below. 10 minutes ago I got a call from Randalwoods out on the left coast and they found something that is perfect for what I want to do. 15x21x3/4 and 1/3 the cost of that other piece. So I'm going to avoid having to resaw and thickness quilted maple, they did it before...
  13. Toddler

    Ryobi BTS3000 on craigs list $155.

    http://raleigh.craigslist.org/tls/420355234.html Seems like a reasonable deal for someone looking for a starter saw (if this is the same as the BT 3000). I like mine. Todd
  14. Toddler

    Help please. Anyone have a spiral cutter jointer near Hillsborough?

    Hi Everyone, I have a guitar neck blank laminated and almost straight, but the headstock portion that is scarf jointed on is about 1/32 of an inch back. The rest is straight. I can't cut the hardwood laminate well on my baby jointer. It vibrates and and if I put down pressure it cuts so slow...
  15. Toddler

    26" woodmaster drum sander for $299 on CL

    http://raleigh.craigslist.org/tls/327158148.html Not mine. Looks old but seems like it could be a good deal even if you have to refurbish it some. Todd
  16. Toddler

    MM jointer / planer 1phase, 16"jointer 3phase Raleigh

    Decided to peek into IRS auctions today. I don't know what these will go for, but right now they look like bargains. Wasn't somebody looking for a 16" jointer around here? Todd http://www.irsauctions.com/index_lots.asp?id=10013&ind=50
  17. Toddler

    Little gloat

    I was searching Craig's list for a table saw and there was a Ryobi BT 3000 in Hillsborough for $150. Guy selling it had it in his garage for years since his father died, but it was in good shape, had the manual, a mobile base, and was less than 10 minutes away. I know it's not a monster...
  18. Toddler

    z-poxy first, or shellac

    So I have my son's small guitar sanded to about 100. Parts of it to 180. Once I get it all up to 180 or 220, I'm going to either pore fill with z-poxy finishing resin or go strait to the tinted shellac. I have red transtint for the shellac. The back is basswood, very soft, and I'd like to put...
  19. Toddler

    Powermatic 10" tablesaw on CL for $850

    It's not specified if it's 1 or 3 phase in the listing. Has a "roller table" and blades. Powermatic 10" industrial table saw w/ extras Todd
  20. Toddler

    I think I was very stupid! Please confirm :)

    I've been getting set to glue up a second guitar neck, which is a laminate of 5 thin boards. Then I cut out the shape to give two neck through the body guitar neck blanks. I was told quarter sawn lumber would be stronger, but if I take 5 quarter sawn thin boards, and laminate them, my end...
    • Toddler
    • Thread
    • confirm stupid
    • Replies: 13
    • Forum: Wood

Premier Sponsor

Our Sponsors

LATEST FOR SALE LISTINGS

Top