Search results

  1. R

    FS: Drill Press Milling Attachment

    ITEM HAS BEEN SOLD
  2. R

    FS: Drill Press Milling Attachment

    This drill press accessory was manufactured by Waterborg (see ad below). It fits a drill press with a 2-3/4" column and will accept tools with a 3/8 diameter shank - although a creative person could make a different tool holder if desired. The collet that holds the tool holder has a 1/2"...
  3. R

    SOLD PP FS: Craftsman (Atlas) 15" Bench Top Drill Press

    Thanks - drill press has been sold PP
  4. R

    SOLD PP FS: Craftsman (Atlas) 15" Bench Top Drill Press

    SOLD - PP I am offering a 15"Atlas made (Craftsman branded) bench top drill press for sale. Model 101.03621. This machine and motor have been completely disassembled, cleaned and painted. All 7 bearings have been replaced - 2 in the quill, 2 in the column at the top of the spindle, 2 in the...
  5. R

    Rules for the "For Sale / Wanted" forum.

    I would suggest marking it sold and leaving it on the forum for others as a reference data point for future sales Rick
  6. R

    WTB: Craftsman/Atlas Quill Return Spring Housing

    looking for a quill return spring housing for an Atlas made Craftsman bench top drill press. I need just the housing but would be willing to buy the housing with spring if that is available. The last [picture shows the broken area of my current housing Thanks Rick
  7. R

    Local Electrician Recommendation

    Thanks for all the suggestions - I have calls into a few right now Rick
  8. R

    Local Electrician Recommendation

    Good afternoon folks - I have a need for an electrician for a small residential job. I could throw darts at a list of electricians and hope I pick a good one but thought maybe someone with more local experience than I would have some recommendations. So I'm looking for an electrician in the...
  9. R

    FS: Delta 24 Scroll Saw Parts

    I have finally gathered up all remaining parts/pieces related to 3 scroll saw refurbs I recently completed. I am offering them up for sale before I pack them away for posterity. All prices are "plus shipping". Reasonable offers are welcome - parts are located in Winston Salem NC. Additional...
  10. R

    FS: Delta Model 1200 Scroll Saw

    Delta 24" scroll saw completely rebuilt. The saw is powered by an original Delta 1/2 HP 4 step pulley 3 phase motor - however, a VFD is included to run the motor from 220 single phase which provides full variable speed.. Saw package includes the saw, welded stand (much more robust than the bolt...
  11. R

    FS: WT Slow Speed Drill Press Attachment

    Rare WT part number 9D113 slow speed attachment for 15" drill Press. Belts are included (not shown in pictures). Looking for $225 but reasonable offers are welcome. Thanks for looking Rick
  12. R

    Wood Turning Classes

    No I ddnLt contact Klingspor - in post 10 I indicated the Mike and I are going to work on my skills Rick
  13. R

    Wood Turning Classes

    I didnLt find any clubs local to me - I think the closest was and hour os away - not terrible and I may join that at some point. Maybe I missed something - is there a club in Winston Salem? Rick
  14. R

    Wood Turning Classes

    Thanks for all the replies - Mike has graciously agreed to help me out Rick
  15. R

    Wood Turning Classes

    Good afternoon - I'm attempting to get into wood turning but am finding that I need some real basic instruction. I'm wondering if there is someplace in NC that offers basic wood turning instruction - specifically spindle turning - I'm not interested in bowl turning at this point. Thanks Rick
  16. R

    Which Wood for Exterior Use

    Thanks guys - I should have mentioned that I have some ash on hand - how would that work? Or how about poplar? Thanks Rick
  17. R

    Which Wood for Exterior Use

    Good morning - I need to repair/upgrade the lattice skirting on our front porch. I want to build a frame with inserted plastic lattice. The frame will be painted. Ideally I would like to use a PVC lumber product but expense precludes that. I'm looking for suggestions relating to which wood...
  18. R

    Hello from Charlotte

    Welcome Bob - this, like OWWM, is another excellent source of information. We need to get together again - I have been thinking about some classes and it sounds like you have some good experience to offer. Rick
  19. R

    Where can I get a band saw blade repaired?

    What width blade? What size bandsaw? I have given up on carbide toothed blades after having two 3/4" for a 16" bandsaw break. Both were Lennox and older blades. There are some opinions floating around that even a 16" bandsaw is not big enough for carbide blades. Rick
  20. R

    Oneida Dust Sentry Help

    Hey Jeremy - I followed your very clear description and ,in ten minutes, had a working dust sentry. Thanks a lot - I appreciate your help! Rick

Our Sponsors

LATEST FOR SALE LISTINGS

Top