Search results

  1. P

    Sanding Box

    Have a small dust collector coming, looking at Plans for a sanding box. Dont need a very large one, planning on 2' x 2', pegboard, 4" collector, baffles. Is it worth making?
  2. P

    Cutter

    Some type of old cutter
  3. P

    Noodle Board

    Working on a Noodle Board/Stove Top protector, all pieces cut sanded. Used 1/2 x 6 clear pine for bottom, 1 x 4 for sides and back. Haven't decided if Stain, or clear Poly, but pondering the Glue up and assembly. I have some clamps to use, and have watched Many Videos, but interested in what/how...
  4. P

    Plexi and Wood

    Hey all, been a crazy year, just started to do a little wood stuff. Making a display box, grooved the underside if the top frame to accept 1/8 plexiglass. What type of glue/adhesive would hold plexi to wood, as the frame is only 1/2 thick, grooved 1/8" not much room for fasteners Any...
  5. P

    Corian Sink

    Reading articles about resurfacing an under counter mount Corian sink. Understand the process, curious if anyone here has tried it. Article suggests first using 120, then 180 grit sandpaper[Hook and Loop 5" ROS discs] Then Non Woven Pads 280-400-600 grit.
  6. P

    Glue

    Working on a small halloween project from 1/4 Baltic birch ply. Need to attach small Hinges to the wood for a functioning Lid. With the wood so thin, even the smallest screws are too long. Is there a Glue I might use?
  7. P

    Bear, sort of

    This is my first attempt with a Log. 16 inches tall, 6 in diameter, from a tree taken down 2 years ago, Silver Maple, and turned out to be Spalted. I beat the heck of of it, was very hard. Trying different things, not great but I like him.
  8. P

    Zinnsser Shellac

    Have a small can of Zinnsser shellac, when I opened it, the cap Popped about 2 feet in the air. This happen to anyone?
  9. P

    Kuska

    My first try at a Kuska. Had a few Cherry logs, about 16 inches in diameter, split one into quarters. Some cuts on the bandsaw for shape. The rest was hand work. Used the suggested Beeswax, Mineral oil finish. The piece of cherry it sits on is the outer part of the log.
  10. P

    Air Filtration

    Currently whenever I cut, Sand I wear a 3M respirator, along with having power tools hooked to Shop Vac when possible. Looking at 2 air filtration units, for the garage where I hack at wood. Powertec AF4000 3 Spd 2 filters 1/6 HP ShopFox W1830-3 3 Spd 2 filters 1/8 HP Both small units, fit...
  11. P

    Gadsen flag

    Took an image of a Gadsen flag and used Oak Ply, wipe on poly, rough sawn oak for frame.
  12. P

    Bathroom sink

    Hope this is OK to ask here, after 3 days of snaking out a drain, decided I want to Remove those Dang Popup drain things and replace with stainless steel strainers. If I am on the right track, do I simply unscrew the 'Lever' in the tailpiece, pull Lever out, Remove Popup, then put Lever back...
  13. P

    Last Supper

    Black Walnut local milled, Live edge, 7/8" no finish
  14. P

    Which Oil

    My boiled Linseed is past using, and want to try another Oil, Mid priced, suggestions? Just for mostly smaller projects I dont make furniture, Thanks.
  15. P

    Pattern from picture

    Had a pattern made from a picture of Great Gdson, used Oak ply, frame is red oak, tongue and groove flooring, cut groove ends off
  16. P

    Moulding

    Our house is nearing 19 years old, it has some nice moulding around all windows and doors..all White. From time I guess, some spaces are showing, and wondering what to use to Fill with that takes paint?
  17. P

    Baltic Birch

    Need a few 12" x 12" good Quality BB. suggestions for Online, tried Rockler , not bad, looking for better quality
  18. P

    Bear

    A Bear for the Daughter...Baltic Birch, 1/4 ply backer sprayed black put 3 coats Wipe on Poly before I started cutting helped prevent liftoff of top layer
  19. P

    NY Yankees

    Couple of NY Logos Pine and Cherry
  20. P

    Raffle

    Many thanks to NCWW, Jeremy, and Ed Lebetkin[donated the prize] Was fortunate enough to win an old school Moving Fillister plane. Any advice how to loosen/Tighten the wedge and blade? Again thank you.

Our Sponsors

LATEST FOR SALE LISTINGS

Top