inlay question

[Dreuxgrad]

Friend asked how to do a banding inlay on a table top. I've done some inlay work, but I'm at a lost
on just how to do a precise mortise on the corners. The table has a concave on both sides of a convex curve as viewed
from above. Any suggestions other than a CNC? Makerspace is closed!
Thanks from the republic
Ed

 

[Matt Furjanic]

Please go to my website: www.inlaybanding.com

Scroll to the bottom of the main page and you will find some videos there that may help.

Call me if you have questions. Inlays are my business!
My phone number is on the website under ”contact.”

Matt...

 

[Dreuxgrad]

Please go to my website: www.inlaybanding.com

Scroll to the bottom of the main page and you will find some videos there that may help.

Call me if you have questions. Inlays are my business!
My phone number is on the website under ”contact.”

Matt...

Thanks Matt, The corners are the issue, especially if using a power router. Really appreciate the offer of calling and will do if edge pattern is to be followed. Discussed with client several options including a medalion, or cutting the corner short with a straight 45. Ed